Dodge Charger Complete One Piece Conversion Driveshaft
Convert your oem 2 piece steel driveshaft to this high quality 1 piece aluminum shaft
| Compatible Applications: |
| Dodge, Charger, 3.6L, 8 Speed, AWD, Automatic, Years 2015-2021, 195mm Ring Gear |
| Dodge, Charger, 5.7L, 5 Speed, AWD, Automatic, Years 2015-2021, 195mm Ring Gear |
| Dodge, Charger, 5.7L, 8 Speed, AWD, Automatic, Years 2015-2021, 195mm Ring Gear |
Heavy Duty 3.5 Inch Aluminum Driveshaft
The factory two piece driveshaft has four common failure points; all three CV Joints plus the center carrier bearing. When you have driveshaft vibrations and shuddering it is time for a driveshaft upgrade. Our heavy duty aluminum driveshaft eliminates the common failure points, replacing them with proven technology and quality engineering. This complete redesign replaces the cv head on each end with a high performance flange and premium spicer u-joints. Install is as easy as removing the old driveshaft and installing your new conversion driveshaft, no known vehicle modifications are necessary. It is always a good idea to double check for clearance.
FREE GROUND SHIPPING INSIDE THE USA
- This product does not qualify for international shipping
- All custom driveshafts have a required build time
- Specs
- Vehicle Fitment
- Quality
| Brand: | Action Machine Inc |
| Converts: | Two piece CV driveshaft to a one piece aluminum driveshaft with flanges on both ends. |
| Material: | Aluminum |
| Tube Outside Diameter: | 3.50 Inch |
| Driveshaft Length: | 62.0 Inch (Flange Face to Flange Face) |
| Hardware: | Included - M10-1.5 Flange Bolts |
| Make: | Dodge |
| Model: | Charger |
| Year: | 2015, 2016, 2017, 2018, 2019, 2020, 2021 |
| Drive Type: | AWD |
| Trans: | Automatic |
| Engine: | 3.6L & 5.7L |
| Trans Speed: | 5 & 8 |
| Differential: | 195mm Ring Gear (DR2) |
Quality Aluminum Driveshaft
When you need a driveshaft that is lightweight, can handle higher torque loads and can give you a nice polish finish, then consider an Action Machine aluminum driveshaft. The Action Machine aluminum driveshaft is ideally suited for street rods, show cars, race cars and as OEM aluminum replacements. While other driveline shops may use .065" wall or .083" wall tubing for their aluminum driveshafts, our volume purchasing allows us to use .125" wall tube for the same price as the thinner tube. You have the best in aluminum performance no matter your application.
If you have any questions we are here to help:
| PHONE |
